sE Electronics DM1

110,31 €
Heti saatavilla
SKU
1315910
Sisältäen: Alv 25.5%

sE Electronics DM1

Explosive level for all your passive mics

LOT of gain

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

+28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD

  • designed for neutral, balanced sound quality
  • the perfect way to boost the signal of a passive microphone
  • gain stays consistent regardless of connected load
  • provides significantly improved level to your mic preamp for proper gain staging

SOPHISTICATED CLASS-A ELECTRONICS

  • state of the art electronics and high-grade FETs provide supremely low noise
  • transformerless design for pristine sound quality
  • provides the lowest noise in its class

DEDICATED OUTPUT BUFFER AMPLIFIER

  • provides +28dB output independent of load impedance or cable length
  • extremely low output impedance
  • drives long cable runs and can reduce susceptibility to RF interference, buzz & hum

    SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH

  • efficient rejection of any electrical interference and noise
  • high-quality finish ensures a great look for many years
  • slim design allows for easy placement in the studio or on stage

    GOLD-PLATED XLR CONNECTOR

  • for loss-free and reliable signal connection

SPECIFICATIONS

  • Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
  • Gain: 28 dB (load 1kOhms)
  • Max output level (0.5% THD): 8.3 dBV (2.6 V)
  • Output noise level: 9 μV (JIS-A)
  • Powering: 48 Volts according toIEC 61938
  • Electrical impedance: 135 Ohms
  • Recommended load impedance: >1k Ohms
  • Current consumption: 3.0 mA
  • Connectivity: 3-pin male/female XLR connector
  • Dimensions: Diameter: 19 mm Length: 95.5 mm
  • Weight: 80 g

 

sE Electronics DM1

DM1, mikrofonilinjaan kytkettävä etuvahvistin dynaamisille mikrofoneille.

Älyttömästi Gainia

Toiset mikrofonit tarvitsevat paljon gainia ja kaikkien pöytien etuasteet eivät sitä pysty antamaan. DM1 DYNAMITE on erittäin pienikokoinen etuvahvistin joka sopii hyvin hiljaisempien mikrofonien tason nostoon. Massiiviset +28dB lisää puhdasta gainia dynaamisille mikrofoneille ja passiivisille nauhamikrofoneille.

Tarkkaan valituilla FETeillä tehty A-luokan etuaste jonka ulostuloimpedanssi ja kohinataso on erittäin pieni. Edistyksellisen bufferiasteen ansiosta DM1:n gain on tasainen +28dB kuormasta riippumatta.

Kirjoita oma arvostelusi
Olet arvostelemassa:sE Electronics DM1
Arviosi
Search engine powered by ElasticSuite
Copyright 2019