sE Electronics DM1

sE Electronics DM1

Explosive level for all your passive mics

LOT of gain

Some mics need a LOT of gain - and not all preamps are up to the challenge. The DM1 DYNAMITE is an ultra-slim active inline preamp that fits seamlessly between your mic and mic pre, providing a massive +28dB of clean, transparent gain for all your dynamic and passive ribbon microphones - perfect for podcasting, recording, or live sound.

With a sophisticated class-A design and specially-selected high-grade FETs, the DM1 has vastly lower output impedance and nearly half the noise of anything else on the market. Additionally, the gain it provides is always a consistent +28dB regardless of the connected load, thanks to its dedicated buffer amplifier.

+28dB OF CLEAN, CONSISTENT GAIN, INDEPENDENT OF LOAD

• designed for neutral, balanced sound quality
• the perfect way to boost the signal of a passive microphone
• gain stays consistent regardless of connected load
• provides significantly improved level to your mic preamp for proper gain staging

SOPHISTICATED CLASS-A ELECTRONICS

• state of the art electronics and high-grade FETs provide supremely low noise
• transformerless design for pristine sound quality
• provides the lowest noise in its class

DEDICATED OUTPUT BUFFER AMPLIFIER

• provides +28dB output independent of load impedance or cable length
• extremely low output impedance
• drives long cable runs and can reduce susceptibility to RF interference, buzz & hum

  SLIM, RUGGED ALL-METAL HOUSING WITH PREMIUM FINISH

• efficient rejection of any electrical interference and noise
• high-quality finish ensures a great look for many years
• slim design allows for easy placement in the studio or on stage

  GOLD-PLATED XLR CONNECTOR

• for loss-free and reliable signal connection

SPECIFICATIONS

• Frequency Range: 10 Hz - 120,000 Hz (-0.3 dB)
• Gain: 28 dB (load 1kOhms)
• Max output level (0.5% THD): 8.3 dBV (2.6 V)
• Output noise level: 9 μV (JIS-A)
• Powering: 48 Volts according toIEC 61938
• Electrical impedance: 135 Ohms
• Recommended load impedance: >1k Ohms
• Current consumption: 3.0 mA
• Connectivity: 3-pin male/female XLR connector
• Dimensions: Diameter: 19 mm Length: 95.5 mm
• Weight: 80 g